Buying on a main road in NSW? Classified road access for duplexes and townhouses
A NSW duplex or townhouse site on a classified road faces extra rules: access from a side street, Transport for NSW approval, noise and…
7 min read
Read
Service
Townhouse and Multi Dwelling Housing Planning
Yield testing, DCP compliance and the SEE for townhouses, terraces, manor houses and villa developments.
Multi dwelling housing is where planning controls start to bite: floor space ratio, site coverage, landscaped area, deep soil, communal open space, parking rates, solar access to every unit and the privacy of every neighbour. The margin for error is small and councils assess these applications closely.
URBA tests yield against the controls before the design is committed, then prepares the SEE and supporting planning documents for lodgement. In R2, R3 and R4 zones near nominated centres, the low and mid-rise housing reforms that commenced in February 2025 opened new options for terraces, townhouses and manor houses; we advise where those provisions apply and where the LEP still governs.
Who this is for
- Developers of three to thirty dwellings
- Owners amalgamating lots
- Builders and designers needing planning input early
What the report or service includes
- Yield and massing test against FSR, height, setbacks, site coverage and landscaping
- Advice on the applicable pathway: LEP, Housing SEPP or low and mid-rise provisions
- Statement of Environmental Effects with full LEP and DCP compliance assessment
- Clause 4.6 variation requests
- Coordination of traffic, stormwater, landscape, BASIX and waste consultants
- Pre-lodgement meeting preparation and attendance
How it works
Step
Yield test
Numbers before drawings: how many dwellings the controls support.
Step
Design review
Concept plans checked at each stage so changes happen early.
Step
Reports
SEE and supporting planning documents.
Step
Assessment support
Responses to council, panel preparation if the DA is referred.
Frequently asked questions
What is the difference between multi dwelling housing and a residential flat building?
Multi dwelling housing means three or more dwellings on one lot with each dwelling having access at ground level, such as townhouses and villas. A residential flat building has dwellings stacked over each other with shared access. The zone and LEP decide which is permissible.
What FSR applies to townhouses?
The LEP floor space ratio map sets it for each site and it varies widely, from 0.5:1 in low density areas to 1:1 or more near centres. The low and mid-rise reforms introduced their own standards near nominated centres. We confirm the applicable figure for your site.
Do townhouse DAs go to a planning panel?
Only where the capital investment value or other referral criteria are met, or where the number of objections triggers referral under the council's policy. Most small townhouse DAs are determined under delegation.
Where we provide this service
Across Sydney, Western Sydney, the Central Coast, the Hunter, the Illawarra and regional NSW. See the areas we service for council-specific notes, including Blacktown, Penrith, The Hills, Liverpool, Camden and the Central Coast.
Related
Services that often go with this one
Reading
Guides related to townhouses and multi dwelling
Torrens, strata or community title for townhouses in NSW?
Torrens, strata or community title for a NSW townhouse or duplex project? How each works, what councils look at and how title affects value,…
7 min read
Read
Townhouses and terraces near Parramatta stations: LEP 2023 and 800 m
How Parramatta LEP 2023, the 800 m low and mid-rise housing catchments at Epping, Westmead and Carlingford, and Parramatta DCP 2023 shape townhouse DAs.
12 min read
Read
Next step
Get a fixed fee for townhouses and multi dwelling
Send the address and your plans or concept. A URBA planner will confirm the pathway and send a fixed-fee proposal, usually within one business day.